Custom PMG165QT SimpleGrout PreMixed Grout, 1 Qt, Delorean Gray

Description

The no-mix, no-mess alternative to traditional grout. The sanded, shrink and crack-resistant formula is also resistant to common household stains. Ideal for grout restoration
.
Protected by moldgard technology.
1 Qt
Delorean Gray
Ready to use
No mixing
No mess
Stain resistant
No shrinking
For joints 1/16" to 1/2"
.
Suitable Tile Types:
For interior use only
Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite
Suitable for wet areas such as tub surrounds, shower floors and shower walls (see Drying Time for more information).
Limitations to the Product:
Porous stone can be stained by grout; follow directions in Surface Preparation
Do not use in steam rooms, areas exposed to prolonged water exposure or underwater
Some ceramic, glass, marble or stone tiles can be scratched or damaged by the quartz sand filler. Perform a test on a small area prior to use
Not for use in movement joints or changes of plane in the tile installation. In these areas us an appropriate caulk or sealant such as Commercial 100% Silicone Caulk or Polyblend® Ceramic Tile Caulk
.
Instructions:
Tile must be firmly attached and cured prior to grouting; please wait at least 24 hours for any dry set mortar meeting ANSI A118.4 standards, and at least 48 hours when using pre-mixed adhesives. Remove spacers and any loose materials from joints. Pre-sealing porous tile or stone with an appropriate TileLab® or Aqua Mix® sealer may be necessary to prevent grout staining. Surfaces and materials should be maintained at a temperature above 50° F (10° C) or below 100° F (38° C) for 72 hours.
WARNING: This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer, and ethylene glycol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov